Please note: There is a damage waiver charge and sales tax applied to all items. Weekend rates will be updated beginning September, 1 2017

Product Catalog

  • Manufacturer: Haulotte Group
  • Model Number: 55 XA

Access like never before. Hydraulic outriggers and automatic leveling allow operation in under 30 seconds. High performance 4WD and light weight provide access to places larger and heavier machines cannot go. Easily transported on a trailer with no commercial driver’s license requirement. Dual power source (DC / Gas) allows for indoor/outdoor use.  Air / water lines to platform.

Rental Rates
  • 4 Hour
    $225.00 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $300.00

    *Tax and Damage Waiver not included.

  • Weekend
    $375.00

    *Tax and Damage Waiver not included.

  • Manufacturer: EDCO
  • Model Number: ALR-E

Air-Powered EDCO Chisel Scalers eliminate hammers, chisels and hand labor! Removes up to 200 sq. ft. per hour of 4″ ceramic tile set in standard thin-set Provides 2,500 hits per minute ALR-E Ergonomic design lets operator stand upright eliminating backaches High-strength tubular handle and soft foam hand grips for operator comfort Quick-change, hardened steel tool chuck accepts dozens of accessories Available in heavy-duty steel or lightweight aluminum.

Rental Rates
  • 4 Hour
    $37.50 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $50.00

    *Tax and Damage Waiver not included.

  • Weekend
    $62.50

    *Tax and Damage Waiver not included.

  • Manufacturer: Multiquip
  • Model Number: MVC88VTH

Our best selling plate just got better! The new MVC88 now features a single cast baseplate and eccentric housing to enhance plate durability, serviceability and performance. An hour/tachometer to help measure runtime and engine rpm is now a standard feature. 

Rental Rates
  • 4 Hour
    $45.00 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $60.00

    *Tax and Damage Waiver not included.

  • Weekend
    $75.00

    *Tax and Damage Waiver not included.

  • Manufacturer: Multiquip
  • Model Number: MVC64VH

Highly maneuverable, ideal for small jobs and narrow areas. Economical plate now features anti-vibration handle system. Extra-thick plate in back provides longer wear time. Solid, high-strength steel base plate with curved edges provides top performance. Great for confined areas.

 

Rental Rates
  • 4 Hour
    $41.25 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $55.00

    *Tax and Damage Waiver not included.

  • Weekend
    $68.75

    *Tax and Damage Waiver not included.

  • Manufacturer: Hilti
  • Model Number: VP-U

The pump is intended for operation in conjunction with Hilti DD150 Core Drill Stand. 

Rental Rates
  • 4 Hour
    $7.50 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $10.00

    *Tax and Damage Waiver not included.

  • Weekend
    $12.50

    *Tax and Damage Waiver not included.

  • Manufacturer: Cat Construction
  • Model Number: 304E

The Cat 304E CR delivers high performance in a compact radius design to help you work in the tightest applications.Spacious and comfortable operator station with excellent visibility and legroom keeps the operator comfortable and reduces fatigue.

Rental Rates
  • 4 Hour
    $243.75 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $325.00

    *Tax and Damage Waiver not included.

  • Manufacturer: Cat Construction
  • Model Number: 302.7D

The Cat® 302.7D CR gives the operator a large comfortable space in which to work. The ergonomic control layout, travel pedals and adjustable wrist rests are engineered to minimize operator fatigue and increase productivity.

Rental Rates
  • 4 Hour
    $187.50 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $250.00

    *Tax and Damage Waiver not included.

  • Manufacturer: Hilti
  • Model Number: DD 150-U

The DD 150-U is great for rig-based wet drilling in concrete for pipe penetrations, cable trays and ducts and for the installation of railings and barriers, hand-guided wet drilling for setting large-diameter anchors and reinforcing bars, and hand-guided dry drilling in masonry for pipe penetrations in plumbing, heating and air conditioning installations and for chimney and stove installation.

Rental Rates
  • 4 Hour
    $67.50 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $90.00

    *Tax and Damage Waiver not included.

  • Weekend
    $112.50

    *Tax and Damage Waiver not included.

  • Manufacturer: Cat Construction
  • Model Number: 301.7D

The Cat® 301.7D CR gives you a blend of power, control and stability to make your working day easier and more productive.

Rental Rates
  • 4 Hour
    $150.00 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $200.00

    *Tax and Damage Waiver not included.

  • Manufacturer: EDCO
  • Model Number: TL-9

The TL-9 is a Direct Drive Floor Grinder with a combination of power and simplicity. The 110-Volt floor grinder is maintenance free. No parts to service and no belts to replace.

Rental Rates
  • 4 Hour
    $67.50 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $90.00

    *Tax and Damage Waiver not included.

  • Weekend
    $112.50

    *Tax and Damage Waiver not included.

  • Manufacturer: Toro
  • Model Number: TX 525 Wide Track

Diesel. Done Right. Our diesel Dingo TX models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. The TX 525 offers amazing hydraulic power, delivering 13.8 gpm and pumping 24 hp to the attachment, yet has a ground pressure as low as 3.4 psi. And because they're part of the full-line family, these diesels are compatible with all of Toro's compact utility loader attachments.

Rental Rates
  • 4 Hour
    $93.75 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $125.00

    *Tax and Damage Waiver not included.

  • Manufacturer: Ridgid
  • Model Number: 31035
Ridgid, 31035 36" Heavy-Duty Pip Wrench.
Rental Rates
  • 4 Hour
    $8.25 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $11.00

    *Tax and Damage Waiver not included.

  • Weekend
    $13.75

    *Tax and Damage Waiver not included.

  • Manufacturer: Intec

Our FORCE/1 package processes up to 970 lbs of cellulose or 350 lbs of fiberglass per hour and weighs 177 lbs.  The durability of this unit is enhanced with urethane seals, a direct drive transmission, and polyethylene construction which resists dents & dings, allowing for an attractive system appearance over years of use.  This system provides ease of transportation to the job site in addition to timely installation of attic insulation – either cellulose or fiberglass -- at 3/4 of an hour for R-19 in a 1,000 square foot attic.

Rental Rates
  • 4 Hour
    $60.00 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $80.00

    *Tax and Damage Waiver not included.

  • Weekend
    $100.00

    *Tax and Damage Waiver not included.

  • Manufacturer: Ground Hog
  • Model Number: HD-99

The Ground Hog HD99 is a Towable Hydraulic Earthdrill that is designed to be powerful, easy to use and require very little maintenance.

The HD99 is the most powerful earthdrill in the Ground Hog line. With it's 9hp Honda engine, the HD99 can easily dig with any Ground Hog auger up to 12 inches in diameter. The use of hydraulics allows the HD99 to have variable auger speed and reverse which is very useful if the auger gets stuck.

Rental Rates
  • 4 Hour
    $56.25 minimum

    *Tax & Damage Waiver not included.

  • 24 Hour
    $75.00

    *Tax & Damage Waiver not included.

  • Weekend
    $93.75

    *Tax and Damage Waiver not included.

  • Manufacturer: Toro

6" wide x 3' deep trencher attachment for Toro Dingo walk behind skidsteer.

Rental Rates
  • 4 Hour
    $56.25 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $75.00

    *Tax and Damage Waiver not included.

  • Manufacturer: Toro

Fork attachment for Toro Dingo walk behind skidsteer.  Adjustable up to 30" wide opening.

Rental Rates
  • 4 Hour
    $18.75 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $25.00

    *Tax and Damage Waiver not included.

  • Manufacturer: Toro

42" wide bucket attachment for Toro Dingo walk behind skidsteer.

Rental Rates
  • 4 Hour
    $18.75 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $25.00

    *Tax and Damage Waiver not included.

  • Manufacturer: R&J Enterprises
Heavy-duty hand-held power drive.
Features reversible 115V or 230V universal motor.
Capacity 1/8"-2" (3mm-50mm) pipe, 1/4"-1" bolt with OO-RB die heads.  Designed for RIDGID No. 12-R die heads.
Rental Rates
  • 4 Hour
    $33.75 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $45.00

    *Tax and Damage Waiver not included.

  • Weekend
    $56.25

    *Tax and Damage Waiver not included.

  • Manufacturer: Hilti
  • Model Number: DCH 300

12" Electric Diamond Cutter. Max cutting depth 4 3/4", 20.7 lbs. 1" arbor

Rental Rates
  • 4 Hour
    $67.50 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $90.00

    *Tax and Damage Waiver not included.

  • Weekend
    $112.50

    *Tax and Damage Waiver not included.

  • Manufacturer: Porter-Cable
  • Variable-speed dial settings from 1,400-2,000 RPM
  • Brush-type skirt surrounds sanding pad, preventing gouging of wall joints and aiding in dust collection
  • Motor located on opposite end of handle from sanding head, providing balance and control
  • Built-in dust collection hose
  • 1 1/4" vacuum hose is 13' long so that large areas can be sanded in one set up
  • Articulating sanding head allows user to sand wide area without changing positions
Rental Rates
  • 4 Hour
    $22.50 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $30.00

    *Tax and Damage Waiver not included.

  • Weekend
    $37.50

    *Tax and Damage Waiver not included.

  • Manufacturer: Bluebird Equipment
  • Model Number: Kaydee 1500

Manufacturer - Bluebird International

Model - Kaydee 1500

Type - Knockdown

Capacity - 1500 lbs

Maximum Height - 99.5"

Width - 53"

Length - 76"

Weight - 294 lbs.

 

Rental Rates
  • 4 Hour
    $30.00 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $40.00

    *Tax and Damage Waiver not included.

  • Weekend
    $50.00

    *Tax and Damage Waiver not included.

Rental Rates
  • 4 Hour
    $37.50 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $50.00

    *Tax and Damage Waiver not included.

  • Weekend
    $62.50

    *Tax and Damage Waiver not included.

Rental Rates
  • 4 Hour
    $18.75 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $25.00

    *Tax and Damage Waiver not included.

  • Weekend
    $31.25

    *Tax and Damage Waiver not included.

Honda Engine
8.0-HP GX240 Series
Long life, proven durability, runs quiet
Contractor recommend and approved
Less maintenance than other engines

Lasting Performance
Heavy-duty, cast-iron construction
Stainless-steel valves
Two-piece connection rods

Two-Cylinder Pump
Delivers more CFM to run more tools at the same time
Operates approximately 8 to 12 nailers

Heavy-Duty Construction<

Rental Rates
  • 4 Hour
    $33.75 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $45.00

    *Tax and Damage Waiver not included.

  • Weekend
    $56.25

    *Tax and Damage Waiver not included.

Splash Lubricated Direct-Drive Pump
Heavy-duty, cast-iron cylinder
Aluminum pump reduces weight
No belts or pulleys to replace

Light Weight
Only weights 60 Lbs.

Twin Stack Tanks
Two 2.15-Gallon tanks provide optimum pressure

Cushioned Handle Grip
Extremely easy to pick-up and carry

120 Volt Plug
Plugs into any standard outlet for quick and easy use

Rental Rates
  • 4 Hour
    $22.50 minimum

    *Tax and Damage Waiver not included.

  • 24 Hour
    $30.00

    *Tax and Damage Waiver not included.

  • Weekend
    $37.50

    *Tax and Damage Waiver not included.